• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Search results

  1. H

    CUCV won't start

    I'm the one that had a fuel problem (fuel filter needed prime/bleed), not an electrical problem. I was asked a question and I gave the guy an answer. No harm in that. I never heard of Thread hijacking. Now I know.
  2. H

    CUCV won't start

    I'm the one that had a fuel problem (fuel filter needed prime/bleed), not an electrical problem. I was asked a question and I gave the guy an answer. No harm in that. I never heard of Thread hijacking. Now I know.
  3. H

    CUCV won't start

    If you converted 24 volts to 12 volts, then why are you still using both batteries? That may be your problem. How many alternators? One or Two? You may have a short in the wiring.
  4. H

    CUCV won't start

    Fuel filter was new this past September. Clamps were replaced when filter was changed. Changed hoses same time. Thank you for the good advise. My fault for the filter losing prime because the truck sat for almost a full month without starting it. A couple days of warm weather and now it's...
  5. H

    CUCV won't start

    Good news. I had time to get under the hood today. Disconnected pink wire from the IP, unscrewed bleeder a quarter turn, removed fuel cap. Placed a small container under bleeder line and cranked engine at short intervals three times. Fuel in container. Closed bleeder cap, tightened fuel...
  6. H

    CUCV won't start

    Hey rodent, I was always told that no question is dumb. So here goes....Once I unscrew the bleed screw, will I need to crank the engine for the fuel to come out the tube ? How long should I let the fuel run out the tube before I shut off the bleeder? I was supposed to have some help today...
  7. H

    CUCV won't start

    I was looking under the hood today and did not see any pink wire's. Bleed screw is on the left top of fuel filter (looking from the front of the truck)? How far do I open bleed screw?
  8. H

    CUCV won't start

    I was not having any problems starting my Blazer this winter at least once a week or every other week I would start the truck and let it run for awhile and maybe take it out for a short drive.. Fired right up, no problems. This week it decides to crank but not start. I was looking under the...
  9. H

    CUCV won't start

    What is IP? I'm sure the GP's are working. There is no smoke. Truck fired up last month and it was much colder. Batteries are fully charged and the starter cranks like it should. I need to get someone over so they can bleed the fuel filter while I crank or I'll bleed the filter while they...
  10. H

    CUCV won't start

    I had my batteries disconnected from my M1009 and a 24 volt charger set on trickle charge for almost a month. Today I connected the batteries to my M1009 in contemplation of starting the truck. I turned the ignition switch on and let the glow plugs cycle two times before starting. Engine...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks