Search results

What have you done to your CUCV today/lately? Finally got my electric A/C installed. I have a 2400W 24V inverter but the A/C only takes about 800W for 12K BTU. . Starting surge does max the inverter. Hot air discharge is between the sidewall skins - there are plenty of exits for the air. I'll...

Not having the time but wanting my M1009 in good shape for driving to Findlay in a couple of weeks, I had my mechanic replace the harmonic balancer (preventative - it was original), repack all four wheel bearings, replace front wheel boots, and change the belts (as long as they were off anyway)...

What have you done to your CUCV today/lately? Got my '09 a big brother! Don't worry, the '09 is still my DD.

What have you done to your CUCV today/lately? We always want pics and part numbers if possible! Nice looking install.

What have you done to your CUCV today/lately? Watts = current(amps) * voltage Amps = watts/voltage 37.5 amps = 900 watts/ 24volts 75 amps = 900 watts/12 volts But I agree, continuous duty or intermittent duty, it makes a difference.

Nice radio. I hope I assume correctly that is a dual band (2M/440) amateur radio. What are you using for an antenna?

What have you done to your CUCV today/lately? Replaced the basic rubber wiper blades with rain-x Latitude blades (17.99 each at Advanced Auto). Wipers move much better now.

What have you done to your CUCV today/lately? You mean besides Steel Soldiers ;-) (look closely at the picture). Navigon Mapping or Waze depending if I have cell coverage or not. Also great for browsing while waiting or taking a break at work. Often check my email before I leave traveling...

What have you done to your CUCV today/lately? relocated my Ram Tablet Mount from my Silverado to the M1009. The Silverado has to get sold to make room for a M35A2. Anyone looking for a 2005 Silverado 2500HD Crew Cab Long Bed?

What have you done to your CUCV today/lately? More like done with, pulled my 5000# Bobcat out of the mud after my farm helper got it stuck today. First chance to use 4x4 since I got it.

What have you done to your CUCV today/lately? Mine were 100% tight. Took it apart, added some shower pan liner, and reassembled. Works like a champ. Need to remove the star screw on the cover to gain access.

What have you done to your CUCV today/lately? Fixed the driver side mirror holding. Put a small piece of rubber under the clamp. 3 days and about 12 door slams later and it is still in the same place. Pics when I do the passenger side.

What have you done to your CUCV today/lately? Replaced the power steering pump and bracket (old pump was fine, bracket wasn't), changed the oil, got the wipers working again by jumping the power and ground at the motor connector (worked) reconnected everything and it works. Probably a voltage...

What have you done to your CUCV today/lately? Got my new to me power steering pump and bracket ( the bracket on the original broke) Christmas Eve. Snow/sleet and lots of rain today so it will have to wait until after skiing!

What have you done to your CUCV today/lately? Changed the oil and looed into why the belts were squeaking. Broken power steering mount :-(. Looking for a replacement. Troubleshooting the wipers which stopped working. Jumped the motor to see if it was the switch or the motor. Motor worked...

Fixed my rear window crank. Pin was slipping past the screws. Add two SS washers, filed the side towards the center flat and cranked it down. Works great.

Changed the oil&filter, added a quick drain plug, and fixed the right turn signal (corroded bulb base, wire brushed)

Added a cold air intake from LMC. Bought the hose clamp locally. The LMC hood liner dropped the sound level 3-5 dB at highway speed. The intake takes off another 1-2 dB. My wife can hear me on the phone now. I don't know if that it an improvement or not ;-) undercoat will come later this summer.

Finally put my LMC hood blanket in. Sounds a little quieter at idle, highway run tomorrow. Started installing my DIY Grab Bars but broke the installation bolt. I guess that is why they call it a breaker bar ;-) Put all the Molle pouches on my Smittybilt GEAR seat covers. Maybe my cab will be...

I actually operate Amateur Radio from my M1009. At the rear is an AB15/MS-11X NVIS HF. The other two are for SINGARS bases repurposed to single band HF (Hamsticks) I can switch between the three. On the other side is another SINGARS for VHF/UHF. Two be added are two Jerry cans for biodiesel.