• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. J

    New here, just pick up a mep-016a

    Well I got it running and everything runs fine for about 5 min all gauges show good, and then it sputters idle's itself down and then dies. It will start right back up but will not stay running more than a couple of secs. I didn't rebuild the carb think that could be the problem. james
  2. J

    New here, just pick up a mep-016a

    Well while reading the manual, I discovered that the generator might work a little better if there were fuse's in it. Both fuse's and caps are missing! Any one know if there is a place near Austin/Houston that whould have them on hand or will I have to order them.
  3. J

    New here, just pick up a mep-016a

    So I cleaned all the lines all the way to the carb, I put the lines back on all the way to the pump. I then cheated a little and left the line open at in side of the pump and pressured the tank unlill the line filled. I tightened the line and then pulled the rope a few times and it started...
  4. J

    New here, just pick up a mep-016a

    Here are a couple of pics. was having some problems loading in first post. james
  5. J

    New here, just pick up a mep-016a

    Well this is my first, i call it treasure wife says junk! I picked this up yesterday, been sitting out in the weather at an auction since rita. So i get it to the house and drain the gas and start working on getting fire, file the points and checking for fire at each pulg wire. I get to the...
Top