Search results

Check out this video by SS member Adventure Driven... https://www.steelsoldiers.com/showthread.php?165906-Adventure-Driven-s-photos-and-videos-of-their-M1079&p=2107425&highlight=#post2107425...

Epicord 30 Amp Twist Lock Power Inlet - Google search - about $15.00

If I understand you are going to "replace" your output with a new RV connector like this... That sounds like an easy solution to me.

I know nothing about 3 phase so I just used 120v. The only breaker change was feeding the panel at the top and feeding the right side. I am not an expert electrician so I just metered out each connection and slowly I got it fixed with no problems. Every outlet and all the lights worked...

On eBay I bought a cable that I thought was correct but turned out it fit the power-in socket (male rather than female). Rather than return the cable, I decided to rewire the inside panel of the truck so the power-in became power-out! Very simple to do. The connector I bought was standard...

I got them on eBay... Military Surplus M35A2 2.5 Ton Truck Fuel Tank Bracket Two for $80 with free shipping.

Homemade is good when it works

The hole in the passenger side front van box bugged me so I used a coffee can lid to make a cover.

Looks like you are making good progress! Always like project pictures.

From what I have been told there is no maintenance of the breather. It is not a problem unless it is busted like mine was. I think you statement "isn't bothered with" is accurate.

New breather installed... one of the cheapest parts I have put on my truck ($13).... The old patched cap goes into the spare parts box for one of "just in case" situations.

Had some oil drops on the ground after the 2+ hour ride to the Rally. A friend, Robert was able to locate the source of the leak - a busted engine breather. The crack was on the back side so you could not see it from the ground. Thanks Robert! I patched the old one with Quick Fix Bondo until...

I found a set of sun visors at the 2016 Georgia Rally! Got both sides and I can now see when heading into that bright afternoon sunshine!

Interior dimensions: Length 12' Width 7' 6" Height 6' 8" Good luck with your project!

I got the compound at an O'Reilly parts store. I bought the giant bottle since I was doing some car and truck cleanup. It was about $40. Doing two vehicles I still have more than 1/2 bottle left. If I were just doing lenses I would buy the small bottle of part number 03900 for about $8.00 on...

I experimented on the old lens and found that 3M Rubbing Compound made them look almost new. In the photos you can see where I did half of a red and amber lens. I now have spares!

I am not sure we are allowed to post vendor information but I used Midwest Jeep Willys. They have free shipping if you buy more than $80.

At the Denton NC Rally a guy (Robert?) had replaced all the old lens in his marker lamps with new ones and they really helped the look of his vehicle. I ordered all mine and replaced them today. The bases and connectors all got a good cleaning while I had the covers off. Before and After...

It had been bugging me that the front sling guide plates on the van did not extend as they were supposed to. Today I decided to work on them. After lots of Liquid Wrench, pipe wrenching and hammering I got the two hold down pins removed and the plates extended. Here is a diagram of where the...

Yes these LEDs are the new Trucklite design.