Search results

I left camp for now I go back in three weeks, the help is much appreciated and I will post a reply when I’m back at camp with results!

I think we are on the right track, after removing P7 i inspected and found no corrosion, after reinstalling the unit fired up, although it only ran for about three minutes and shut back down. No indicator lights came on at all. The fuel pump did stay working, we repeated this about three times...

readings are Battery voltage tested prior and confirmed holding with switch in prime and run. All terminals tested 25.6 with switch in off position. In on position as follows S17 = 4.2/4.2 CB1 =6.1/5.1 S1 = 2-6.2 4-4.4 6-4.5 8-4.5

Ok also here is a better discription Having an issue with my 802a, it runs my hunting camp. Last night it shut down, no fault lights. Nothing.. Tried to crank it Nothing… I thought maybe the alternator went, checked battery voltage both were 13V and 12.9. Read a thread on SS, I checked volts...

I am having the same issue this gentleman was, I checked both batteries, both are correct voltage. I have proper voltage in all spots you mentioned above. My panel lights will come on very dim but when you move selector switch to prime and run they will go out. The unit will crank just fine with...