Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Well the new "improved" flame heater nozzle I got from Memphis is definately bad also. Hooked it up to an air compressor and it just started spraying air out the nozzle at any pressure. Called memphis and they had me talk to service, the guy sent me a new one of the original design that he had...
No you would need to put the probe on the exahust side. The flame heater hole is on the intake. If you put a probe in the flame heater hole you would be reading pretty close to ambient temperature.
No problem Deathrowdave, let me ask you this then. What direction does the check valve on the return line need to be in? I thought I read somewhere that the small line (higher pressure line from the pump) just is used to pilot activate the valve and that the return line is what supplies...
deathrowdave, any chance you can put a picture up of your setup?
Afterbeing unable to get the cap out of the rear of the original flame heater (until I got mad and drilled it then pulled it out with an easy out) I finally bought a new style one from Memphis and believe it must be leaking...