Search results

I have the older 8274 with the original motor, not the newer 3.X hp motor. It would do all of the above mentioned things. Was your winch new or used? Check all of the wire connections on the contacts in the control box. There are four solenoids in there, make sure all are clean and tight. This...

That winch should very easily drag that truck with all four wheels locked and dug in. If it can't then something is wrong. I woould guess the cables going to it are too small, too long, or bad connections. Like I said before, I have the very same winch and have pulled with it for 40 years until...

Lock the brakes and let the truck dig in till the winch just about stalls. That will simulate being stuck or being tied off and pulling someone else out. If it does not bend then you may be alright but keep in mind that very seldom do you get a straight pull. Rolling 6011 with a 7018 filler is...

No way is that setup going to hold that winch. Not only do you not have the pull strength on the bumpers but you are mounted way to high and you will have rotational force twisting the whole thing down. Ideally the fairlead should be between the frame rails. If not between then right above and...