Search results

Ok, there are two rubber parts. One that merely holds the wires and one that holds the pins and is pressed through the metal fixture from the back. I took two c-clamps and hooked them over the back of the flange (assembly taken off of the truck to dangle down). A large socket that would fit...

Squirt truck designed a box that works pretty well. It takes power from the truck lead #37 and converts it to 12 volts with a DC-DC converter. Then you supply 12 volt power via a 20 amp fuse to inertial brake controller. That gets the signal for brake function via an airline switch that hooks to...

Emmado, I managed to pop it out with a pair of C-Clamps a big socket and a wrench to bridge across. Came out pretty simply with the use of steady pressure on the c-clamps. Soldering in the tight space was tough. It looks like it'll hold, but not my best soldering job. I'll have to make sure I...

How do these things come apart? I need to be able to supply power on pin K (wire 37) for the power converter that's going to provide power for the brakes and brake controller in the trailer. I've pulled the rear compression ring off. Should the whole rubber plug pop out the back allowing the...