Search results

Curious where you find it? Shows discontinued.

I used these at my local parts store. You can probably find them cheaper online but I needed them the same day. Makes a huge difference. Cluster takes 3 and your voltmeter will take 1. I think you can pull the needle off. This thread shows a guy doing it here although not the right way to...

I don't have the sway bar either no death wobble ever. It's usually the king pin bushings and steering components. I do have a newer stock drag link with maybe 500 miles for sale. I do get body sway but my springs are soft front and rear.

Cleaned up the cluster. Took it all apart, cleaned out the dust, polished the clear lens, painted the needles, replaced trans indicator with an overdrive piece since the factory one was busted and I had it laying around. This will also help when I swap the 4L80e in. Also replaced most of the...

Yes. Mine no longer bounces or makes a noise. Basically adapting the small red tube from a can of white lithium grease to a piece of rubber with a hole in it like a piece of tube or anything that can seal against the speedometer cable outer housing. Pushes the lube up the housing. No need to...

Thanks! 5" total lift. 4" Tuff Country EZ ride with 1" zero rate in the front, 58" F150 springs with shackle flip and 1" zero rates in the back for smoother ride. Tires are 37x12.5x17 and are very affordable for that size.

Productive weekend on the m1008. -Replaced 13g GP's with 60g. Seems to start quicker. -Installed Zerostart 1000w block heater -Lubed speedo cable. Found a neat trick to lube from the bottom by the trans. -Tried to touch up the camouflage job but didn't turn out so well. Time for total...

I also had an issue with DIY4x recently. I love the products they make but after placing an order for ez-inch 1" blocks, shackle flip with HD shackles, a week goes by and it hasn't shipped. I called them up and Tracy said they were waiting for the EZ inch pins and might be another week. It...

Where did you get that? DIY4x has them for $88. http://diy4x.com/images/D/Guardsman.JPG

Yes. They can do several colors