Search results

No, sorry. Please see attached picture and explain to me at what point in that circuit would the light come on? Hint, the answer is never. If any of the positive (BLUE wires in the diagram I posted) were shorted to ground anywhere it would be the same as the circuit in the picture below...

I'm going to guess it is not shorted at a wire because if it was the brake light would not come on. The way it is acting, it seems as if something has a high current draw rather than a dead short. Maybe the wiper motor is no good and the switch is on for example. Or maybe there is a bad...

First I don't believe it's a ground issue. A bad ground wouldn't trip the breaker like that (assuming it is a tripping breaker we hear). I have attached a basic wiring diagram, M997 in this case since I couldn't find a M998. They should be close enough for this discussion. I have also...

I would start at the circuit breaker. Remove the gauge panel and there are 2 circuit breakers. I attached a picture if you don't know what they look like. CB-2 is the one that supplies power to everything. Find that one and pull one side of it and check for voltage to see what side is the...

I think you are tripping a circuit breaker also. There are 2 behind the gauge cluster panel. One is directly off the RUN position. I would start looking for the problem before doing that again.