Search results

I replaced my parking brake shoes on the Deuce today. Printed the task out on paper, took them out to the shop and went to work. Sure is nice to have a parking brake that holds well.

I blasted my windshield air motors, the locking arms, wiper arms and painted them flat black. I installed a new passenger side windshield (did the driver's side a few weeks ago) and stood back and admired my never done, work-in-progress Deuce. The previous windshields looked as though someone...

Steve, I thought the fit was outstanding, the rubber seals so well it's a little difficult to lock the window. I haven't been in the rain since the replacement, and I don't park my truck outside, but I'm almost positive it won't leak.

C & C Equip Window Replacement I removed the glass from the old frame as I had a new windshield glass, blasted the frame and noticed lots of various sized pinholes in the metal. I was just going to replace the glass until I discovered that. Bit the bullet and bought a new windshield from C & C...

Place the nozzle on the cowl as far as possible away from the windshield, toward the hood. DO NOT place it where the instructions tell you to, the pattern it sprays will only catch the extreme lower corners on the windshields. Do not ask why I have one extra hole in my cowl.

Got a good deal on a couple of strobe lights, I cleaned them up and put them on the Deuce. $16 shipped on fleabay.

I've tried adjusting air pressure, that didn't seem to work. Gonna try this and see. A Club Member fashioned a toe in/out checker out of PVC, I'm going to copy it and check my front end. I'll let you know.

I tinkered around all week after work on the Deuce. I installed an interior armor light in the cab, and re-installed the gauge panel for my boost and pyro. The boost gauge was operational for the event this weekend, but the pyro was not. Installing the pyro pre-turbo is a little more work than a...

Some AF knucklehead tore up the bumper pretty good by not paying attention to where the wire rope ends and the chain starts on the winch line. I got a used replacement bumper and found out all the holes don't line up for an easy install, so last night I removed all the bolts in the front bumper...

Hoist Cable Size PM gamagoat1 for an answer. I borrowed his when I did my tranny swap. I don't recall the diameter, maybe 5/16", but the cable seemed to be about 6-8' long. He'll give you the correct specs.

And I'll testify that baby works like a charm. I borrowed mine from Club Member Gamagoat1, when I did my recent tranny swap. As for what I did this week on the Deuce, absolutely nothing. Unfortunately I buggered up my back Wednesday afternoon, and haven't been out in the shop since. I hope She...