1008/10/28/31 lug and nut?

[Csm Davis]

What size are the lugs for the 1008 trucks? 9/16 or 14mm have looked and searched but no joy.

Sent from my SM-G900V using Tapatalk

 

[Gripy]

I'm not sure on the size, but it should be Standard measurement. The switch to metric happened in the 90's (?)

ETA: the internet says 9/16"

 

[Tinstar]

The HUMMWV lug nuts fit my M1008A1s perfectly.
Looking for receipt paperwork that had size on it now

 

[timarr]

They are 9/16.

 

[Recovry4x4]

They are 9/16.

This is fact.

 

[Trailboss]

IIRC, the Ford/Dodge/Chevy pre-metric 8-lug wheels used 9/16 x 18 lugs, and the 5-lug and 6-lug wheels used 1/2 x 20 lugs

 

[Csm Davis]

They are 9/16.

And do any of you great guys know the actual stud length or part number?

This is fact.

IIRC, the Ford/Dodge/Chevy pre-metric 8-lug wheels used 9/16 x 18 lugs, and the 5-lug and 6-lug wheels used 1/2 x 20 lugs

Sent from my SM-G900V using Tapatalk

 

[timarr]

dorman 610-189 3 inch long for rear, 610-563 for 3 inch front

 

[juanprado]

And do any of you great guys know the actual stud length or part number?





Sent from my SM-G900V using Tapatalk

Front or rear studs?

 

[Csm Davis]

Front or rear studs?

Why don't you list both that way anybody else looking can find them.

Sent from my SM-G900V using Tapatalk

 

[juanprado]

here are the part numbers for single or dual rear wheels

http://www.oreillyauto.com/site/c/s...ickup+4WD&vi=1053065&year=1985&make=Chevrolet