• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

2013 M1097A2 Heater saga continues...

13M1097A2

New member
20
14
3
Location
Ohio
Thanks to those that have helped me with my truck so far. The fan motor outlet which is attached to the heater box is turned upward, and I can't see how the duct assembly (12447046, part 14 in the TM 9-2320-280-24P-2, Figure 332.). It would seem like the fan motor outlet is the male for the female opening on the outlet on the duct assembly (which faces toward the front of the vehicle). The two just don't line up. Can the motor/fan be rotated? I guess I'd wonder why its in the current orientation...would seem as tough it should be in the right spot.

Figure 332 also shows a 2" flexible house (part 11), but I can't figure out what it goes to. The two outlets at the top of the duct assembly go to the left and right defroster vents, and if the 3" outlet on the back of the duct assembly do indeed go to the blower, not sure what that extra outlet could be for.
 

Attachments

Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks