BDenmark92
New member
- 8
- 7
- 3
- Location
- Florida
DC circuit breaker trips as soon as the master switch is in the AUX fuel position.
I can reset the breaker when the switch reaches the main fuel supply position and the generator will start and run fine from there. I found a little box by the fuel pumps that has four wires on each side of it. If I unplug that box, the circuit breaker does not trip. What is the function of this box and where can I find one?
Sorry for the low quality picture, I was hoping these numbers could provide some information. I can provide a better one tomorrow![Box.jpg Box.jpg](https://www.steelsoldiers.com/data/attachments/546/546265-5cc7ef29032870df75b2c20664a82432.jpg)
I can reset the breaker when the switch reaches the main fuel supply position and the generator will start and run fine from there. I found a little box by the fuel pumps that has four wires on each side of it. If I unplug that box, the circuit breaker does not trip. What is the function of this box and where can I find one?
Sorry for the low quality picture, I was hoping these numbers could provide some information. I can provide a better one tomorrow
![Box.jpg Box.jpg](https://www.steelsoldiers.com/data/attachments/546/546265-5cc7ef29032870df75b2c20664a82432.jpg)