85cucvM1009
New member
- 21
- 1
- 1
- Location
- Seekonk,MA
Hello I have an 85 m1009 with a little issure. I have new glowpugs, new glowplug relay, new batterys, and a new glowplug temp sensor. when i turn the key to the on position the wait light will come on and cycle, but the relay will not click. i have 12 volt power to the relay, when i installed my puch button for temp use the relay will click. i did the test from the tm. out of all the test only one came up not in spec the temp sensor. the tm says it should be 800oms min and i got 5. so i'm lost i traced the wires no brakes no burn marks anywhere.
help whould be very helpfull thanks to all that can help.
help whould be very helpfull thanks to all that can help.