Alignment issue?

[67 evil eleanor]

I've noticed my front tires are "cupping" which normally I would attribute this to the "toe" being off. Course with a front axle vehicle, I know the ackerman is pretty much non nonexistent. Is there a toe setting that works well and prevents this?

 

[gringeltaube]

Maybe if you would only "tow" her straight ahead.... ?

Start with TM 9-2320-361-20, section 9-7.


G.

 

[clinto]

http://www.steelsoldiers.com/showthread.php?75213-tire-wearing-uneven&highlight=front+tires+cupping

http://www.steelsoldiers.com/showth...Camber-Question&highlight=front+tires+cupping

http://www.steelsoldiers.com/showth...t-End-Alignment&highlight=front+tires+cupping

http://www.steelsoldiers.com/showth...-Box-Adjustment&highlight=front+tires+cupping (post 16)

http://www.steelsoldiers.com/showthread.php?71456-Tire-wear-problems&highlight=front+tires+cupping

http://www.steelsoldiers.com/showthread.php?68910-M35A2-Alignment&highlight=front+tires+cupping

That should be enough to get you started. That's the result of the first 4 pages of results. There are 12 pages of results, so you should be GTG.

 

[67 evil eleanor]

Well at least I know now about as much as I did before I ask the question. I will look elsewhere.

 

[nk14zp]

1/8" to 1/4"

 

[67 evil eleanor]

Thank you, that's what I was after.