MilitaryRestoration
New member
- 1,279
- 1
- 0
- Location
- Vancouver/Yakima, Wa
Had a great trip really... However did have two problems. First one was noticeable right away but didn't find it till we started doing our pre-trip inspection, lubrication, etc. As I was grease'n the drive lines i grabbed the main one going back to the first set of rear axles and it was all sloppy. First thought was o' no...! Universal joint... But come to find out they had just forgot to put the four nuts back on the flange...So off the the local hardware store we went. Got everything prep'd and ready to go and about a 1/4 way of our long journey... Ft. Lewis to Yakima, Wa... the trailer brakes lock'd up for no reason. So after trying to let them cool and get them broke free, with no luck, as well as backing the brakes off (or attempting to anyway) we finally decided to just crack open the brake lines and IT WORKED!... So then we were back on the road again. Truck drove like a dream, but should with new radiator, motor, transmission, xfer case, axles, brakes, winch, driver seat, all new grade 8 bolts everywhere etc etc... Guess my dad saw something I didn't because I did not notice most of what he did when biddin'. A+ dad
Attachments
-
183.2 KB Views: 432
-
203.5 KB Views: 435
-
148.8 KB Views: 434
-
167.4 KB Views: 433
-
169.4 KB Views: 433
-
200.5 KB Views: 431
-
200.5 KB Views: 432
-
187.1 KB Views: 431
-
199.4 KB Views: 433
-
179.9 KB Views: 433