Banks turbo install

[welpro222]

Hey guy I got my Banks turbo installed over the weekend. I didn't take many pictures as I was really trying to get this installed and running for hunting this weekend. Anyways what a difference, it is very nice to have some power. Going up hill is not a chore anymore.

Specs:

J Code 6.2 Diesel
ARP head studs with fresh Fel-pro 6.5 head gasket
ARP complete main stud kit with custom full length main girdle
New humvee injector pump (turned up 3/16 of a turn for turbo)
Banks turbo kit (about 3 years old)
3 inch banks exhaust system
Stock 4 core radiator

Here are some pictures

 

[rsh4364]

Looks good,have any picts.of front of motor when on stand?

 

[Cantos]

If you want more power, install a exhaustpipe from the driverside to the other side. The pipe must reach the passangerside header before the turbo so you have more pressure.
Greets.

 

[Ilikemtb999]

If you want more power, install a exhaustpipe from the driverside to the other side. The pipe must reach the passangerside header before the turbo so you have more pressure.
Greets.

The banks kit has a crossover pipe from the drivers side to the passenger side turbo manifold.

 

[rsh4364]

Do they all crossover at rear of motor?Never mind,did some searching,I see the crossover is in front.

 

[Ilikemtb999]

The banks kit is in the front and the turbo sits much lower than the 6.5 stock setup. The 6.5 setup has the crossover in the back.