• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Barking dog?

panzerjunky

New member
281
0
0
Location
san diego ca
Just a quick question
when I push in the clutch or better when I let off the clutch it barks a sound sorrta like letting off a brake on a bigger truck is this just the clutch linkage rubbing on somthing or is the clutch air assisted?
Thanks Jerry
 

scooter01922

Well-known member
1,721
42
48
Location
Newbury, MA
Dunno what that sound is, but i can tell you the clutch certainly is not air assist. Betting you are just rubbing on the sheetmetal where the petal goes thru the floor or something similar.
 

FreightTrain

Banned
2,730
13
0
Location
Gadsden,Al
Yea,check that your not rubbing.Only thing I can think of that would make that sound.The clutch setup is pure mechanical.Levers,rods and pivots.Nothing else.
 
Last edited:

FreightTrain

Banned
2,730
13
0
Location
Gadsden,Al
it will more than likely be dragging at the floorpan.You can do that standing beside the drivers door and push the clutch with your hand.Just look for a spot on the shaft where it looks like it has touched.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks