• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Best speedometer cable?

cucvrus

Well-known member
11,448
10,348
113
Location
Jonestown Pennsylvania
Get one out of a salvage truck pull the cable clean and lube it up good and it will last for years. It is not a bad idea to remove the cable from the back of the speedometer every once in a while and shoot some cable lube down in the cable housing. It even works its way up into the speedo head and keeps it smoother and quieter. Also make sure the cable is properly routed / secured and has no hard bents in it and is secure up away from heat sources. Pay attention to ALL the little things and you will not have any other troubles.
 
Last edited:

roveroverme

Banned
350
0
0
Location
port saint lucie/ florida
Had the same symptoms , would be sometimes good, sometimes make noise and sometimes the needle would bounce. I then took the cable off as described and sprayed it with WD40 and let it run down inside the cable before putting it back on. that cured it.

 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks