Bringing to Aberdeen 2011

[atankersdad]

Ok here is the first list of what I am bringing 2 sell or trade.

M109 w/w whisler 20K Miles on new 11x20's 3500.00
M35A2C Tan whisler, Cargo cover and tan 105 trailer Iowa truck 4000.00
bench seat w/good cushions
(5) fiberglass bows
set of fiberglass deuce troop seats w/wooden headboard
Vinyl 3color camo GMA cargo cover
plastic battery box
set of deuce bumper extensions for a winch
deuce (10k) snatchblock
set of chain feet for medium towbar
(6) new 11.00-20 radials w/1 mounted on a deuce rim (new tube & flange)
(5) new 11.00-20 tubes
(5) new 11.00-20 flanges
(76) sets of new lugwrenches -- 2 piece set "wrench & bar" that has 1 1/2" 6 point on one side & 13/16 bud on the other side
spring seat w/ford seat attached
COBRA seat
(2) medium towbars in great condition......one green w/1" feet & one tan w/1" & 3/4" combo feet
fiberglass headboard for a 5ton
10 +/- wheel chocks
canvas front for a deuce
(6) 11.00-20 chains
multifuel fuel-fired heater COMPLETE
hotwater heater .... may be missing parts
deuce & 5ton manuals
(3) new low air warning lights (installed on dash & tied into buzzer)
deuce master cylinder rebuild kit
deuce wheel cylinder rebuild kits
many safety triangles
20' 2 pin style slave cable
(2) slave cable adapters --- *** nato TO 2pin ***
LED lightbulbs 24volt
(2) bottle jacks
canvas duffle bag - military issue
new shock for spring seat
metal cover for power steering connections behind front left tire on a 5ton
deuce bed straps
(4) canvas tailgate chain covers
BAGS of brand new lugnuts
BOXES of brand new wheel studs
lots of misc brand new parts

OK how was that for a start?? pm me if you are interested in something.

 

[maddawg308]

Here's what I got:

M880 front bumper
M880 top bows
M151 jeep top bows
M151 jeep wheel rims
FMTV rear bumper
FMTV top cab cover
FMTV wheel rim
FMTV air tank box
FMTV starter
FMTV cab heater
FMTV cargo box side panels
M416 trailer axle
M416 trailer springs
ALICE frames and packs
ALICE canteen covers
ALICE e-tool covers
HMMWV 2-door rear cargo vinyl covers (3 ea)

I might have some more goodies if I can swing up to Colemans' in time before Aberdeen....

 

[atankersdad]

Almost forgot
5 new Borg Warner D Turbos
2 new Bosch Deuce IP's
Spring bases
box bases
A/C kit red dot
NIB Fuel fired heater
M109 box FF heater

 

[HAWKMAN]

I'll be bringing down another cushman to cruise around and see the show, hopefully I don't sell it before the auction! Also bringing down a couple dummy MGs and CUCV manuals...does anybody need any CUCV stuff? let me know and I'll load in the van

 

[BKubu]

I will be bringing:

*a few of the Cambro drink dispensers as seen on the MKT kitchen trailers. (Used, but nice: $45)
*a few of the Cambro food containers (replacement for the mermite cans, but nicer...plastic and stainless steel inserts with rubber seals)...a few are new with some storage marks (with the new ones, the inserts are still wrapped in plastic bags). (New: $45, used: $35)
*one NOS canvas end curtain for a deuce. ($20)
*a few very nice, but used tan plastic 5 gallon water cans ($20) (there are two that are decent, but have paint on them: $15)
*NOS nylon tailgate safety strap for 2-1/2 or 5 ton ($20)\
*used canvas tool wrap ($2)

I can bring (if anyone shows any interest):
*NOS fiberglass troop seats for 5 ton dump trucks ($250 a set of two)
*NOS dump truck troop seat kits (troop seats, 3 color camo vinyl cargo cover, bows, 3 color camo vinyl end curtain, safety strap, all hardware, and more) ($850)
*used, but very nice, metal bows for a 5 ton dump truck. ($120)
*NOS tan vinyl cargo cover kit for a deuce in a wooden crate (cargo cover, bows, etc.) ($350)

 

[rfischba1]

I plan to bring:

* 900 series camo cab cover, looks new
* M105 Cargo cover
* Lots of MV tail tights, real clean
* Many pup tents and shelter halves, $5.00 a half, $15 full set.
* CUCV shakles
* Complete antena sets
* M101a2-a3 cranks for landing legs
* Camo/digital tape, $5.00 roll
* M101 spare tire holders/ look new
* Gas can holders/metal base, look new
* Several 900/16 STA 8ply tires mounted on 5 lug bud rims, tires are new. $150ea.
* Nice M101a2 trailer with new cargo cover/fiberglass sides.
* Lots of military manuals
* M101 trailer wriing harness, and plugs.
* Fiberglass rear gates for M101 trailers, look new.
I need to take a look in the garage and see what all I'm missing, more to come.

 

[Sephirothq]

If any one wants the following I can bring it with me:
Hot water heater kits for a duece or a 809 5 ton. They are two different kits i have both.
duece cab in good condition, if anyone wants to replace a rusted cab or make a 4 door truck
clutch pressure plate flywheel for a 809 250 cummins
plastic battery boxes for a duece
misc ldt engine parts to include IP and turbo
misc 250 cummins parts
steering box for a duece with column
I have some other duece parts that i can't think of right now.

 

[krall]

I know it aint much but I got the 1 3/4" straps I do up for tow straps, they are approx 16K capable, I also got some monster 60K and up staps. can do up to 240 ft on the single ply
smaller lengths will be there no mater what but longer will need to get ahould of me before.

 

[jcappeljr]

I am only 20 minutes from Aberdeen,I have alot of deuce parts,complete deuce parts trucks,900x20 tires,New M105 trailer,M101 TRAILER,m116 TRAILER,GOOD RUNNING m35,deuce front bumper,deuce rears,and other parts.Call with needs 410-808-5227,JOHN

 

[jeffhuey1n]

wish I could make it to Aberdeen. Have fun guys

 

[rideni]

50 cal cradle and ammo can holder
Maybe some machine gun parts kits if anyone is interested

 

[hedelta]

Tent light kits, humvee doors and I still have to look.

 

[CARNAC]

Whatever doesn't get unloaded at the NJ Show. Suspect I'll still have several pioneer tool sets (pick, axe, shovel).

 

[atankersdad]

I can bring the following if some one committs to buying. These are heavy and bulky. Or come to my house and we can load them with the bobcat.

2 complete winches for a deuce 900
1 rebuilt 5 ton winch (just the winch) 600
M66 gun ring 850
Hardtop for gun ring with legs and reinforcing plate 900

 

[panzerwillie]

Any body got good working M1009 tailgate also alternator brakets and A/C brakets for a M1010 that can bring them thanks

 

[jcappeljr]

Also have deuce doors,m880 hood and front bumper

 

[HAWKMAN]

Any body got good working M1009 tailgate also alternator brakets and A/C brakets for a M1010 that can bring them thanks

I've got a nice, rust/dent free gate complete ready to install...$150.00 drop me a deposit and I can bring.........

 

[atankersdad]

This thread is starting to get interesting.

 

[ssdvc]

I am looking for a few things for my new M1009, please PM me.

I need a 31" spare tire and rim (in very serviceable condition please), a complete jack set up, a rear radio tray and a complete antenna set up (antenna compatible with a CB, exterior mount and guard)

I am also looking for a few good deals on..... a fire extinguisher and mount, a CB radio set up, "tweaked", if someone has one laying around, a Whelen strobe and siren/PA controller, 2 "Scepter" diesel fuel cans with spouts, one blue "Scepter" water can, a complete and fully working (and tested) rear power window set up and a set of side sliding windows, complete with the wings attached.

Thanks, Scott

 

[Sephirothq]

Anyone have any radial tubeless 20" tires they will be bringing?