bigflew
Member
- 202
- 15
- 18
- Location
- alpena michigan
i need a simple answer. what can i thin carc with mil-dtl-53039b, type 1
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
caec thinner
- Thread starter bigflew
- Start date
Stonepicker1
Well-known member
- 2,441
- 77
- 48
- Location
- Coconut Creek, Florida
Reduction:
If required, use MIL-T-81772
Type 1 Reducer, R91K20 or equivalent.
MAK R6K30 (slow), Polane® Reducers
R7K84 and R7K94 (medium), R7KC1
VOC exempt reducer or Tertiary Butyl
Acetate are also acceptable. Reducer
Type 1 Reducer, R91K20 or equivalent.
MAK R6K30 (slow), Polane® Reducers
R7K84 and R7K94 (medium), R7KC1
VOC exempt reducer or Tertiary Butyl
Acetate are also acceptable. Reducer
must be polyurethane grade.
deuceman51
Member
- 885
- 10
- 18
- Location
- Scotland South Dakota
He is correct. I sent you a pm with the recommended ones and I forgot to mention MAK. Sherwin Williams recommends that you don't use acetone because it evaporates too fast that is why they like MAK, MIBK, and MEK to use as thinners.