opie65
New member
- 73
- 0
- 0
- Location
- Huntsville, AL
I'm looking for the info on M35A3 Torque, and I think the Beadlock info is there also.
I'm not able to LOGSA in anymore....
I'm not able to LOGSA in anymore....
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Can anyone get me some info from PS: Monthly; Aug2000, Issue 5
- Thread starter opie65
- Start date
Stonepicker1
Well-known member
- 2,441
- 77
- 48
- Location
- Coconut Creek, Florida
I found this in issue 567 and 573. Hope this is what your looking for.
Stonepicker1
Well-known member
- 2,441
- 77
- 48
- Location
- Coconut Creek, Florida
I'll have to print the page and type the info in, sorry it put the hole PS mag's on the attachement.
Stonepicker1
Well-known member
- 2,441
- 77
- 48
- Location
- Coconut Creek, Florida
PS Mag issuse 573, page 8: M35A3 Wheel Torque Talk, Any time you install a wheel on a M35A3 truck, the stud nut torque must be rechecked after 50 miles. Here's the torque to hold the wheels: hollow stud (CTIS): 275-300 lb-ft, solid studs: 390-420 lb-ft.
PS Mag issue 567, page 10: M35A3 Beadlock, Need only the beadlock for a wheel on the M35A3, 2-1/2 ton truck? fig 117 of tm 9-2320-386-24P that item 2 is NSN: 2530-01-398-2022.
PS Mag issue 567, page 10: M35A3 Beadlock, Need only the beadlock for a wheel on the M35A3, 2-1/2 ton truck? fig 117 of tm 9-2320-386-24P that item 2 is NSN: 2530-01-398-2022.
opie65
New member
- 73
- 0
- 0
- Location
- Huntsville, AL
Thank You. I even learned something else from all that....