khestee
New member
- 19
- 0
- 0
- Location
- Carthage, NC
I have a MEP 803A, which is operating nicely. When I built my house I had a transfer switch installed at the panel and a 30 Amp plug connected to it on the outside. Question is, can I connect a 30 amp plug that is on a 10/4 wired cord to this plug. If so how is it properly connected at the gen? See my pics. I know I need to take the male end off, just wondering which wires go where. Thanks for any advice or suggestions.
![gen.jpg gen.jpg](https://www.steelsoldiers.com/data/attachments/367/367132-1e1530534fe1bc22fffc7b76ba6471fe.jpg)
![plug.JPG plug.JPG](https://www.steelsoldiers.com/data/attachments/370/370010-2a4fc4f379d6c501c332711260e1417d.jpg)
![panel.jpg panel.jpg](https://www.steelsoldiers.com/data/attachments/370/370011-84a378fdefa3b75bff69c2d096dc822d.jpg)
![cord.JPG cord.JPG](https://www.steelsoldiers.com/data/attachments/370/370012-f9882b929e3d0498daf44e95304a11d2.jpg)
![posts.JPG posts.JPG](https://www.steelsoldiers.com/data/attachments/370/370013-367767f5fdddb82260260ba411f3aa62.jpg)
![gen.jpg gen.jpg](https://www.steelsoldiers.com/data/attachments/367/367132-1e1530534fe1bc22fffc7b76ba6471fe.jpg)