Composite stoplight - taillight bulbs

[NEIOWA]

Composite stoplight - taillight (as fitted most modern trucks/trailers)

I'm Looking for the civilian bulb # for stop, tail, turnsignal bulbs 12V.

 

[mangus580]

Check the Parts X-ref..... I am pretty sure they were added last week.

 

[red devils dude]

if not the 24V one is a 28V 1.02A 32cp S-8 size#1683?

 

[NEIOWA]

Check the Parts X-ref..... I am pretty sure they were added last week.

Looks like the NAPA part # are for the 28V bulbs. I'm looking for replacement bulbs for a 12V system (will only be towed by a civ. vehicle).

 

[mangus580]

I would suspect that if you walked into Napa with that #, and told them you needed the 12v version, they would be all over it...

if you go to one of the 'teenager/computer' chains though, I doubt you will have that luck...

 

[CGarbee]

I have a page on my website with the 12 and 24 volt numbers including a description of what bulb they are (so you don't have to pull the cover and bulb on an existing light to find the number for xref...)
Look at:
http://www.garbee.net/~cabell/12voltconversion.htm

Good luck.

 

[red devils dude]

I would suspect that if you walked into Napa with that #, and told them you needed the 12v version, they would be all over it...

that was what I meant but i never finsh what I type.

 

[G744]

#1156 for stop/turn, #67 for tail/Bo marker.

dg

 

[mangus580]

could someone add these in the notes for the parts xref please?

 

[NEIOWA]

I just realized the trl TM has part # for 24V AND 12V bulbs. Just have to figure out which is Stop vs turn.