Confirming I have the right AC pulley.

[ramdough]

I have a 1999 M1083A1 with a serpentine belt 3126.

I have the factory AC compressor bracket copies from Berend.

I bought the CAT adapter Pulley number 298-1308

when I flipped the pulley over, I saw a big boss on the back that did not look like what I saw on an install video. Maybe my memory is bad.

Can someone confirm this pulley is right before I open the part?

Thanks!

 

[ramdough]

I have a 1999 M1083A1 with a serpentine belt 3126.

I have the factory AC compressor bracket copies from Berend.

I bought the CAT adapter Pulley number 298-1308

when I flipped the pulley over, I saw a big boss on the back that did not look like what I saw on an install video. Maybe my memory is bad.

Can someone confirm this pulley is right before I open the part?

Thanks!

One more question.... will I need longer bolts or anything else to install?

thanks
Again!

 

[Berend]

The 298-1308 is the correct pulley


Verzonden vanaf mijn iPhone met Tapatalk

 

[ramdough]

The 298-1308 is the correct pulley


Verzonden vanaf mijn iPhone met Tapatalk

Will the original bolts work, or do I need longer ones.... or any other hardware?
Thanks!

 

[Reworked LMTV]

Will the original bolts work, or do I need longer ones.... or any other hardware?
Thanks!

Amazon.com

 

[ramdough]

Amazon.com

Thank you very much for the link!

 

[m-35tom]

yes you need longer bolts, they are about 1/4" longer.

 

[ramdough]

yes you need longer bolts, they are about 1/4" longer.

Thank you sir!

 

[m-35tom]

50 ft lbs torque for 12.9 class