roger-wilco-66
Member
- 598
- 0
- 16
- Location
- Karlsruhe, Germany
I want to go on a field trip with the deuce and a working VIC-1 tomorrow - just need to install the surpressor now. I have the right connector for the surpressor on the power-in socket of the unit, but I need to solder a cable on it with the right polarity.
Does anyone know or can point me to the schematic for this plug? I also noticed that it is keyed, but don't know the right position for the keyed sleeve, which can be altered.
I searched the TMs but haven't found anything - the only TMs I found on the unit don'T cover it.
Thanks
Mark
Does anyone know or can point me to the schematic for this plug? I also noticed that it is keyed, but don't know the right position for the keyed sleeve, which can be altered.
I searched the TMs but haven't found anything - the only TMs I found on the unit don'T cover it.
Thanks
Mark