cucv bench seat color

[SSMOORMAN@VERIZON.NET]

Looking for the color of the bench seat on a 1985 M1028 truck. And where can i buy a upholstery kit . Not sure if the color is brown ,buckskin, or some other color .

 

[MrBouncer]

All that I know of are plain burgandy. Jc Whitney or LMC are the most well known suppliers. If you have the backqround redoing it yourself is the way to go. I was quoted 375 to 450 by those in the biz I talked to. So you might want to consider high quality seat covers.

 

[SouthernSteel]

i have seen a few diffrent colors

All that I know of are plain burgandy. Jc Whitney or LMC are the most well known suppliers. If you have the backqround redoing it yourself is the way to go. I was quoted 375 to 450 by those in the biz I talked to. So you might want to consider high quality seat covers.

THese trucks were built with parts GM had left so the burgundy was very widely used color how ever i have seen brown and tan interiors but heck go with what ever u want unless u are tryin to stay military i would do what made me happy with it its your truck GOOD LUCK

 

[bkwudzhom]

I have seen one or two that have been done in black. It's not orgional but I like the look and am looking to change mine to black when I can.

 

[3dubs]

I figure my truck is being re-outfitted for a new mission. I would just change seat covers myself. It is way cheaper to order it and do it yourself. If you can pull the seat out and put it back in you can change the covers. I would look into new foam as well. Just look up pictures online of reupholstering car seats. You just cut the old hog rings and pull the cover off. Sometimes the foam tears and it can just be patched, but that is why I say replace the foam. Doing it yourself it is not that much more. If the torn foam moves it may be uncomfortable and it may also hold surprises. After the cover is off it is easy to swap the foam. Then put the new cover on. It has to be pulled tight and new hog rings to hold it in place. Do not waste time saving hog rings just buy more than you need, they are cheap and it is a big time waster to try to save them.

 

[wallew]

OK, I can at least help with the correct GM color code for the dash and the doors.

I would 'assume' (I KNOW, I KNOW) the vinyl is the same color.

http://www.steelsoldiers.com/cucv/56523-m1009-interior-door-panels-atlanta-area-3.html#post654182

The paint code is :

3054
DK TBRONZE
82 GM
76 DN