res0wc18
Member
- 552
- 2
- 18
- Location
- Everett, Wa
So has anyone ever put a turbo setup on a 250 in their rigs?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Cummins 250 with turbo?
- Thread starter res0wc18
- Start date
- 4,741
- 1,123
- 113
- Location
- Gaithersburg, MD
Check with JWALLER.
clinto
Moderator, wonderful human being & practicing Deuc
Staff member
Administrator
Super Moderator
Steel Soldiers Supporter
Supporting Vendor
- 12,596
- 1,127
- 113
- Location
- Athens, Ga.
supermechanic
Member
- 274
- 1
- 18
- Location
- poconos, pa
I did this mod a few years back, kept the fuel setting the same.
no noticable smoke any more.
quite a bit quieter as well.
used the parts from a 335 cummins, including exhaust manifold.
had to fab my own intake plumbing from 3 inch tubing, works rather well.
Just spent the last half hour trying to post the pictures of this, can't figure out how to do it.
I am using Microsoft Photo Editor.
Where is the 'cut and paste' type shortcut?
no noticable smoke any more.
quite a bit quieter as well.
used the parts from a 335 cummins, including exhaust manifold.
had to fab my own intake plumbing from 3 inch tubing, works rather well.
Just spent the last half hour trying to post the pictures of this, can't figure out how to do it.
I am using Microsoft Photo Editor.
Where is the 'cut and paste' type shortcut?
- 9,576
- 211
- 63
- Location
- Dickson,TN
I have the parts to convert if you need them 
.
.res0wc18
Member
- 552
- 2
- 18
- Location
- Everett, Wa
So what kind of power gains did you receive?