• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Dealing with parts People!!

IBEZKUM

IBEZKUM

Member
46
1
8
Location
Jamestown Rhode Island
Hey, Use Guy's!!
Anyone change Their tie rod's??
Trying to, cross reference TMs to Real World,
I came up with this, LMC parts 4,5,6
They say, It Don't Jive!
For an 86 chevy and (NEVER HEARD OF CUCV)
What's your take on this??
Any help, Will be Appreciated!!
 

Attachments

mangus580

mangus580

New member
6,010
282
0
Location
Western NY
You are looking for the Tie rod parts for the dana 60 front axle. Tell them you need them for a K30, and you should be set.
 
W

wallew

Active member
Steel Soldiers Supporter
2,520
18
38
Location
San Angelo, Tx USA Planet Earth
IBEZKUM said:
Hey, Use Guy's!!
Anyone change Their tie rod's??
Trying to, cross reference TMs to Real World,
I came up with this, LMC parts 4,5,6
They say, It Don't Jive!
For an 86 chevy and (NEVER HEARD OF CUCV)
What's your take on this??
Any help, Will be Appreciated!!
Click to expand...
Dude,
In the current LMC book for the Blazer/Jimmy on pg 113 on the bottom half, you should look at parts 7,8,9,10 for the 81 - 91 4wd Blazer/Jimmy.

Hope that helps.

jim
 
IBEZKUM

IBEZKUM

Member
46
1
8
Location
Jamestown Rhode Island
Well, My Parts came, took four days, from Rockauto, But missing
Were 1 castle nut, 1 cotter pin and 1 dust boot!
Used old ones on cheaper tie rod end.
Here's a list of parts and part numbers I have purchased thus far.
Keep in mind, when Buying a new alternator there is no pully,
I was able to find a deep grove pully, helps keep the belt in place.
Again, thanks mangus & everyone!!!
 

Attachments

You must log in or register to reply here.
108,602members
163,856threads
2,305,288posts
399online users
Top