Denton TX folk..... need help to transport

[coachgeo]

ok..... this is a little backward, don't need to move an MV.... I need a MV to help me move my log cabin (its on wheels).

Im a Unimog Guy but had to sell it to save my home. I now have discover the home (the cabin) is straddeling neighbors property. I need to drag it back 20-30 feet.

It is back in the woods.... I put it in with a large IH and with help of a Backhoe tucked it back in as far as it could. Thought I was back enough.... Surveyor says no.

I'm in dire need of say a duce and snatch blocks orr... two Dueces orrr??? Ground can be soft too cause it is in back of former pasture land. All wooded.


Neighbor raising cain and threatening action I really need help.

Thinking maybe during christmas break might fit some folk??

Coachgeo AT Hotmail DOT Com
94zero 686 297nine

 

[M1075]

Sounds like a project for Jim!

 

[armytruck63]

Sounds like a job for a GOER. I would help if I were closer. Good luck.

 

[fuzzytoaster]

I would but my deuce is pending EUC.

 

[coachgeo]

Sounds like a project for Jim!

Does Jim have a user name so I can PM him or can I assume he will pop in here all on his own?

 

[USAFSS-ColdWarrior]

If I were closer than 280 miles away I'd answer your BATTLE CRY.

Come on, local SteelSoldiers...........

 

[coachgeo]

Bk 2 da top

 

[broman78]

****, duece isn't road worthy.

 

[coachgeo]

****, duece isn't road worthy.

know any of the other North TX folk with any big winched offroad rig? If so please pass a notice of this thread onto them. Would very much appreciate it.

 

[badga the badger]

i would but im too far and my 109 would be too heavy in soft soild ecspecilly with my singles. i would sink like quicksand

 

[Alredneck]

Just trying to help but posting pics of the setup and where it needs to be moved to might be of some use to folks trying to help and the equipment needed to get it done.

 

[reb87]

Try Jim, he is in Denton
Steel Soldiers::Military Vehicles Supersite - View Profile: jimmcld

 

[coachgeo]

Try Jim, he is in Denton
Steel Soldiers::Military Vehicles Supersite - View Profile: jimmcld

****.. how'ld I miss this post.

ok.... PMed and emailed him now.

 

[coachgeo]

Just trying to help but posting pics of the setup and where it needs to be moved to might be of some use to folks trying to help and the equipment needed to get it done.

sorry got no pics.
. its flat loose soil land with lots of leaves on top.
. Trees have to be removed so an MV can get behind it.
. Need chains for attaching to trailer for rear pull?
. need chainsaw if yours is bigger than mine.
. landing strip or board to put under cabin wheels of cabin would make it easier.
. Big jack to assist with above.
. if have winch need tree straps & snatch block(s)
. need prayers,
. need a cute petite blond lady (just thru that in their for ****z and grins).
. I'll supply beer and food.
. Sorry all the blonds I know are avg. age of 8yrs (Get your mind out of the gutter!!! Im a coach is why I know them)

 

[coachgeo]

can trade ao 105A2 trailer for your efforts???

 

[coachgeo]

Well Jims got the right kinda rig to do this BUTTTTT... it's truck duty namesake has been reassigned to mall cruiser duty (parade vehicle). Since this job requires an Old Sarge like "truck" who likes work duty; the feel of brush sliding on its panels, and the whine of it's transfercase and winch motors... a Mall Cruiser wont cut it so he's chose to bow out.

any other ideas?

 

[3dAngus]

A local construction company with a Cat D8 and winch would probably do it for a M105.

 

[coachgeo]

A local construction company with a Cat D8 and winch would probably do it for a M105.

Thanks for the hint. Will check into it.

 

[timntrucks]

wish you were close. a m816 would be the ticket.. dont know of any that are close enought to help out