- 2,960
- 30
- 48
- Location
- Tiro, Ohio
Can anyone tell me what code the 383 green paint is? Want to pick up some paint locally, doesn't need to be carc. Would Napa or a automotive paint store work?
Thanks,
Dennis
Thanks,
Dennis
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Deuce paint codes
- Thread starter Stretch44875
- Start date
- 1,825
- 80
- 48
- Location
- West Tennessee
It is FS595B 34094 - a good paint store should be able to match it from that.
Info from my Standard Catalog of US Military Vehicles, 2nd Edition - shameless plug!!!
HTH,
David
Info from my Standard Catalog of US Military Vehicles, 2nd Edition - shameless plug!!!
HTH,
David
- 2,960
- 30
- 48
- Location
- Tiro, Ohio
Thanks!
Guess I should have looked in my standard catalog book then.
Guess I should have looked in my standard catalog book then.
acetomatoco
New member
- 2,198
- 7
- 0
Original paint for a Deuce of vintage age is 24087 Semi gloss OD
Manstein
Chaplain Emeritus
- 331
- 4
- 0
- Location
- Cartersville Ga.
I tried matching it locally and was not succesful. I ordered from Rapco and got happy.
FormerNewMVGuy
Active member
- 1,237
- 10
- 38
- Location
- stockton NJ
Is it cheaper that way, from rapco I mean? I bought a gallon of 383 Green from alfa heaven, because sherwin williams wont sell it to me here in new jersey because of the V.O.C. law, I managed to find the reducer here but once its gone thats it for that to! I dont remember the price exactly but think it was around 80.bucks for the gallon.
Manstein
Chaplain Emeritus
- 331
- 4
- 0
- Location
- Cartersville Ga.
I contacted Sherwin Williams here in town and was finally able to find a rep who would sell the CARC but by the time you bought the primer, reducers and paint it was looking like about 1500.00. The rattle can job cost me about 350.00.
I would have preferred the CARC but it wasn't in my budget. Plus, I could work on it a little here and there without cleaning up paint guns and dragging compressors and all the other junk around.
I would have preferred the CARC but it wasn't in my budget. Plus, I could work on it a little here and there without cleaning up paint guns and dragging compressors and all the other junk around.
- 1,825
- 80
- 48
- Location
- West Tennessee
Scott,
If you are in NJ and are not in a hurry for paint, then wait until the April (or is it May) Aberdeen show - lots of suppliers of paint there, and no hazmat charges.
Rapco, AlfaHeaven, Baxter, Memphis, all pretty much have their hands tied by the hazardous materials fees of transporters - and that can be expensive.
DD
If you are in NJ and are not in a hurry for paint, then wait until the April (or is it May) Aberdeen show - lots of suppliers of paint there, and no hazmat charges.
Rapco, AlfaHeaven, Baxter, Memphis, all pretty much have their hands tied by the hazardous materials fees of transporters - and that can be expensive.
DD
CGarbee
Well-known member
- 2,472
- 552
- 113
- Location
- Raleigh, NC
About the best deal that I found on shipping was from Mark at Rapco who will palletize and send it by truck if you purchase three cases (or more)... I've set up some group buys in the past with some of the guys near me in order to get the quantity needed and total shipping was less than what UPS Hazmat alone would have been...
The other "deal" is that I tend to pick up surplus paint that we test at work (and other places) and sell it at Aberdeen and elsewhere... Still have plenty of Navy Haze Gray, International Orange, etc...
The other "deal" is that I tend to pick up surplus paint that we test at work (and other places) and sell it at Aberdeen and elsewhere... Still have plenty of Navy Haze Gray, International Orange, etc...
- 7,058
- 147
- 63
- Location
- Mid Hudson Valley NY
If your in NJ, call MilSpray. www.milspray.com