frank1669
Member
- 31
- 0
- 6
- Location
- northenr Idaho
Hello: I am woundering if anyone here would know were I can purchase A dodge 6x6 transfercase OR any transfer case with dual rear and single front outputs. Thank You Jerry
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Dodge 6x6 Transfercase
- Thread starter frank1669
- Start date
- 12,196
- 314
- 0
- Location
- gainesville, ga.
i beleive that a cckw had that kind of xcase
AROOGA
New member
- 8
- 1
- 0
- Location
- Fallbrook, CA
Frank,
Did you try Vintage Power Wagons in Iowa? If not, check them out.
SF,
T.
Did you try Vintage Power Wagons in Iowa? If not, check them out.
SF,
T.
M37Dodge
Member
- 108
- 0
- 16
- Location
- Elizabethtown, PA
Frank,
Use a NP200 out of a M37 - very common. Just swap on the WC style yokes. I have a M37 and put a WC output yoke to the ebrake output shaft to get 2 rear facing yokes - for a centered rear project. Helitool's website shows how to do the conversion.
-M37Dodge
P.S. the M37 NP200 uses a 1:2 ratio versus the WC 62/62 1:1.5 ratio for low range. This is moot for most people.
Use a NP200 out of a M37 - very common. Just swap on the WC style yokes. I have a M37 and put a WC output yoke to the ebrake output shaft to get 2 rear facing yokes - for a centered rear project. Helitool's website shows how to do the conversion.
-M37Dodge
P.S. the M37 NP200 uses a 1:2 ratio versus the WC 62/62 1:1.5 ratio for low range. This is moot for most people.