rtjraleigh
Banned
- 240
- 2
- 0
- Location
- SOUTH
A few of SS members have contacted me about the dual springer seat conversion and rt246/524 radio install. Here are some photos.
When i removed the bench seat out of my 1983 m35a2c it already had the two front holes set for the springer. All i had to do is drill out the rear two holes and put oversized washers on the underside.
I fabbed the bracket for the mt1029 radio mount out of 2" angle. All i have to do is fab up the front support for the bracket. I have a bunch of 2" left over and can fab one up for next to nothing for anyone whose intrested.
If anyone has any questions feel free to ask. rob
When i removed the bench seat out of my 1983 m35a2c it already had the two front holes set for the springer. All i had to do is drill out the rear two holes and put oversized washers on the underside.
I fabbed the bracket for the mt1029 radio mount out of 2" angle. All i have to do is fab up the front support for the bracket. I have a bunch of 2" left over and can fab one up for next to nothing for anyone whose intrested.
If anyone has any questions feel free to ask. rob
Attachments
-
28 KB Views: 83
-
38.3 KB Views: 84
-
27.4 KB Views: 85
-
23.3 KB Views: 91
-
45.3 KB Views: 101
-
36.7 KB Views: 104
-
30.4 KB Views: 108