eatont9999
New member
- 120
- 0
- 0
- Location
- DFW, Texas
I'm making some progress on my MEP-803A installation. I plumbed in the exhaust system last weekend. I will attach a video of it in this thread. The first hurdle was getting the generator positioned into place with no heavy moving equipment. I wound up strapping it to some vertical beams in my shop and using my truck to pull against the strap in the opposite direction. A bit dodgy but it got results. I used my porta-power to push it into final position.
I started digging my trench, which I hope to finish this weekend. I have the transfer switch and proper cable. I need the conduit and to weld up a bracket to hold the transfer switch in place. Hoping I can get it done this weekend since the wife and kid are out of town.
https://www.youtube.com/watch?v=0kvccvyZvd4
I started digging my trench, which I hope to finish this weekend. I have the transfer switch and proper cable. I need the conduit and to weld up a bracket to hold the transfer switch in place. Hoping I can get it done this weekend since the wife and kid are out of town.
https://www.youtube.com/watch?v=0kvccvyZvd4