FU1 for Mep802a/803a etc

[TacMac2012]

This will likely be the same and used on many MEP gensets. I need the FU1 cap/fuse if anyone has one. I will rewire it if need be but prefer to have the original cap.

 

[Guyfang]

@kloppk

Also, look in every corner of the control cube. Even take the top off. Most of the time they are there, but hidden.

 

[kloppk]

@kloppk

Also, look in every corner of the control cube. Even take the top off. Most of the time they are there, but hidden.

None here. Sent the one I had a while back to someone.

 

[Guyfang]

Maybe @Light in the Dark , or @CallMeColt

 

[Jeepadict]

Pretty sure I have a handful of these at home. Will be away for a few more days yet.

Sent from my SM-G970U using Tapatalk

 

[CallMeColt]

I don't have one right now.

 

[Light in the Dark]

Cap (and body): https://www.mouser.com/ProductDetai...dglko7ruoNg==&countrycode=US&currencycode=USD

What you want, molded black though. Shouldn't be the end of the world. Will fit the fuse body you already have.

Fuse: https://www.mouser.com/ProductDetai...0HesTffljHg==&countrycode=US&currencycode=USD

 

[TacMac2012]

@kloppk

Also, look in every corner of the control cube. Even take the top off. Most of the time they are there, but hidden.

Yep, it was in the very front left corner! Crisis averted. Thanks

 

[CallMeColt]

Yep, it was in the very front left corner! Crisis averted. Thanks

Lots of goodies hiding in the corners in these....