Fuel Filter / Water seperator

[jterry211]

The previous owner of my M1009 really must not have cared much for it or was a real cheapskate. The filter assembly was bypassed and a .99 cent filter put in its place. Question is which tube on the side is in and which one is out? Already know how to prime it just wanted to put a new filter on it and test it out before buying an aftermarket assembly.

Thanks,
Jason

 

[Drock]

Here's what mine looks like. The front line is the (IN) from the (Lift/fuel, pump). It runs down the back of the passenger side valve cover. The rear line is the (OUT) and runs down the center of the lifter valley into the injection pump.

 

[jterry211]

Thanks for the reply. I am looking for the factory separator layout.

Thanks,
Jason

 

[Drock]

I can't help with ah pic, but the large hole is the (IN) and the smaller one is the (OUT)

 

[jterry211]

Thank you I will try it out tomorrow when it's warmer lol.

 

[cpf240]

It should all be in the TMs, which are on this site...

 

[jterry211]

I looked through the TMs couldn't find much on it. Thought someone might know off the top of their head.

Thanks,
Jason