• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Gasket/Seal for gunners hatch

JonM934

Active member
Steel Soldiers Supporter
281
221
43
Location
Herriman UTAH
My gunner's hatch gasket was all worn out so I have been looking for the proper replacement for months. I finally gave up and found one that is really close. Here is a photo of them both.

20200725_101634.jpg

Old one (OEM) on the left, new one on the right. The foot or so of the old one is the only section that was decent. The rest of the old one was garbage.

It takes about 6 feet to do the whole hatch.

Putting the new one on, I used a section of 2x4 to hit it into place because it is a tight fit.

20200725_100615.jpg

The new one looks a lot better!
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks