Generator drive pully. Cummins

[Gamagoat1]

Does anyone know where I can get a pulley for the generator 809 series, Cummins?
Mine is busted, ,,,,,,

 

[texas-5-ton]

Have you checked with Memphis Equipment Mike?


Chad

 

[Gamagoat1]

Not yet, but I will. Probably Tuesday when they open again.
Thanks Chad

 

[texas-5-ton]

After I posted earlier Mike, I got to thinking that maybe you could take your generator (or pulley) to you local alternator or generator shop. The one here usually has a mountain of old alternators laying around and maybe they could get you fixed up as well. One more avenue, you might also check with Red River and see if they can get one for you.
hope this helps

Chad

 

[Gamagoat1]

Thanks again Chad, I'll try that also.
Mike

 

[WillWagner]

Is it the pulley on the gen. or the pulley behind the damper?

 

[Gamagoat1]

It's the pulley on the alternator.

 

[TheBuggyman]

Is it the same as the one on the M35? I might have one if it is.

 

[Gamagoat1]

It looks the same as my M35A2 but I can't tell by the parts manual.
It's deff the same alternator. The number on the pulley is SP992

 

[TheBuggyman]

I'm at work right now Mike but I will check tomorrow morning when I get home.

 

[TheBuggyman]

Alright, took off the pulley I have and it measures an approximate 5/8" bore with a keyway, overall OD of 3-5/8" and two grooves. Did not find the SP992 number that you listed but on the back of mine are two casting numbers as follows:
LN78128
ORD.108898(or 9)29

Let me know if this will work.

 

[Gamagoat1]

It's the right size, I'll pm you.

 

[Gamagoat1]

Chad,
Thanks for the help!!
I called Memphis and received the pulley today. Exact replacement.
Thanks to all for the help!