• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Getting started

Vinny

New member
I need yall's help getting my mule running. It's been down for 30 years and in the family for 40 or so. It's a November 57 produced four cylinder. I am having trouble getting spark to stay constant. My Magneto it working great, carb and fuel system seem fine. Yall know any little quirks I don't?
 

clinto

Moderator, wonderful human being & practicing Deuc
Staff member
Administrator
Super Moderator
Steel Soldiers Supporter
Supporting Vendor
Are you getting fire at the end of the plug wires?
 

hndrsonj

Senior Chief/Moderator
Super Moderator
Steel Soldiers Supporter
Call Bill Watson and put on new plugs, wires, and rebuild Mag.
 

monighan

New member
the coil is probably breaking down when it warms up .or maybe just clean points.rebuild mag or get a new one.
 

Jimmy

New member
Ditto on the mag, also be careful on running a mule motor after it has been sitting that long or you will destroy the jugs. I think it is recomended to remove them and make sure there is no flaking.
 
Top