Warren Lovell
Member
- 476
- 4
- 18
- Location
- SAN DIEGO, CA
Well, I took out my trans tunnel covers and sanded with 80 grit then brush painted two coats of Herculiner. No brush marks visible and the stuff is nice and tuff! I used 1/2 can of the quart size to do the three pieces. It dries for recoat in about 1.5 hours. It is completely dry in 12 hours and ready for installation and use. Make sure to stir it very well to susoend the bits of rubber.
Next is the rest of the floor and the firewall and back of cab. After I do that, I will post some photos. Guys, this is da S5@3*!
Warren
Next is the rest of the floor and the firewall and back of cab. After I do that, I will post some photos. Guys, this is da S5@3*!
Warren