laproscopic
New member
- 24
- 7
- 3
- Location
- lemoore ca
High range doesn’t work. So all the 1-4 gears work fine on that shifter and low range and reverse work fine on that shifter. But when I shift in the high range nothing happens. And it doesn’t feel like it’s engaging. It feels like the shifter just wants to slide to the right over to the lower range position.
I have done lots of searching and I see that there can be a problem with the bushing that controls the shifter for the four Gears. I know that that pushing can be replaced and I have one of those.
But I can’t find anything concerning the shifter that controls high range reverse and low range. I do have a bushing that I purchased But before I start digging into it I was wondering if there’s something I need to consider besides just a bushing replacement.
any ideas?
![497E721F-EE54-4421-8C7E-32FB8572517E.jpeg 497E721F-EE54-4421-8C7E-32FB8572517E.jpeg](https://www.steelsoldiers.com/data/attachments/553/553799-228ab6baea79f53f4ab2787f74fa2bfe.jpg)
I have done lots of searching and I see that there can be a problem with the bushing that controls the shifter for the four Gears. I know that that pushing can be replaced and I have one of those.
But I can’t find anything concerning the shifter that controls high range reverse and low range. I do have a bushing that I purchased But before I start digging into it I was wondering if there’s something I need to consider besides just a bushing replacement.
any ideas?
![497E721F-EE54-4421-8C7E-32FB8572517E.jpeg 497E721F-EE54-4421-8C7E-32FB8572517E.jpeg](https://www.steelsoldiers.com/data/attachments/553/553799-228ab6baea79f53f4ab2787f74fa2bfe.jpg)