Screwface
New member
- 21
- 23
- 3
- Location
- Jacksonville/Florida
What PCB boxes are recommended for the M1152A1 variants, and what impact would an older PCB have (KDS)?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
HMMWV Start box question
- Thread starter Screwface
- Start date
- 3,406
- 3,244
- 113
- Location
- Brooklyn, NY
Funny but I just posted this reply for another member.
Just read my post on how to rebuild the PCB and lose the TCU. Call me if you don’t want to build it yourself and prefer for me to sell you a unit.
Screw the TCU and the integrated circuits that get fried. Pushbutton PCB is the way to go.
Overthought PCB EESS junk. Just need a robust pushbutton unit and it will last and Last.
Just read my post on how to rebuild the PCB and lose the TCU. Call me if you don’t want to build it yourself and prefer for me to sell you a unit.
Screw the TCU and the integrated circuits that get fried. Pushbutton PCB is the way to go.
Overthought PCB EESS junk. Just need a robust pushbutton unit and it will last and Last.
- 6,314
- 8,864
- 113
- Location
- Papalote, TX
See the sticky added