jeremymx26
New member
- 211
- 3
- 0
- Location
- Brownsville ,PA
So I installed a hood reinforcement kit on my newly restored hood and installed it on my HMMWV. I also installed new airlift gaskets and seals.
My question involves the seals and gaskets.
They just don't fit properly and seem to be catching on the reinforcement causing them to set at an angle.
Do I need to trim something or use different seals.
Thanks in advance for any input.
My question involves the seals and gaskets.
They just don't fit properly and seem to be catching on the reinforcement causing them to set at an angle.
Do I need to trim something or use different seals.
Thanks in advance for any input.