How to bleed the power steering

[highfavor1004]

I have been looking in the threeds and Tm but so far unable to locate it. I am in a rush to beat the weather so can some tell me a short form version of how to do this

 

[highfavor1004]

I know have to jack the truck up and then let it sit for an hour then go lock to lock but is there a bleeder screw

 

[73m819]

1---fill reservoir
2---start truck
3---turn wheel lock to lock,
4---check reservoir , add if needed
5---turn lock to lock 4 or 5 times
6--- check reservoir, add if needed
7---shut truck off
8---drink a beer

 

[area52]

repeat step #8 as much as needed if steps 1-7 did not go well!!

 

[highfavor1004]

The power steering works now. only two things left on the M246 the PTO for the wrench is not turning the shaft. And the second thing is getting a light switch.

 

[73m819]

The power steering works now. only two things left on the M246 the PTO for the wrench is not turning the shaft. And the second thing is getting a light switch.

make sure the KEY is in the pto output shaft whare it drives the shaft

 

[highfavor1004]

The shaft that the key that comes from the PRO is not even turning

 

[73m819]

are you sure the pto is in gear, there is 2 forwards, 2 neutrals, 1 reverse

 

[highfavor1004]

the pto leaver only clicks one time, and then it become really hard to move

 

[73m819]

check you linkage, are you sure you have the right lever