I Need a Picture of the Clutch Pedal Location - M38A1

[Bravo2Uniform]

I had to replace the entire floorboard, all the way to the firewall, on my M38A1. Either my new floorboard is missing a hole with which to extend the clutch pedal or I am looking at something wrong.

Could someone please take a ruler and place it near the clutch pedal opening and take a picture for me? I need a reference point to punch the correct hole.

Or, alternatively, just tell me how I'm looking at this the wrong way.

Thanks.

 

[NDT]

MD Juan left those holes off because there is so much variation in people's Jeeps. Simply remove the pedal from the clutch arm, allow the arm to rest on the bottom of the floorboard, and mark the hole you need on the bottom of the floorboard through the hole in the end of the arm.

 

[Bravo2Uniform]

Thanks - I was unsure about punching holes in the floorboard without really thinking it through. You rock, thanks for the answer.