vinnies10
New member
- 173
- 1
- 0
- Location
- florham park NJ
cutting the frame and the rear comes out tomorrow
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
i started to bob thee deuce
- Thread starter vinnies10
- Start date
cutting the frame and the rear comes out tomorrow
- 2,868
- 27
- 48
- Location
- Delta, PA.
It looks like you are off to a good start,the CAT hoe makes it easier.
Billy Bobbed
Active member
- 1,346
- 13
- 38
- Location
- Terre Haute,Indiana
KsM715
Well-known member
- 5,149
- 142
- 63
- Location
- St George Ks
Cheater 
Use of heavy equip and plasma cutters is not alowed.
Use of heavy equip and plasma cutters is not alowed.
jimh1985
New member
- 134
- 0
- 0
- Location
- lizella, GA
yea
I tell ya that looks allot better than the way im doin it... angle grinder... drill... chain and a tree makes for bed removal lol.
I tell ya that looks allot better than the way im doin it... angle grinder... drill... chain and a tree makes for bed removal lol.
vinnies10
New member
- 173
- 1
- 0
- Location
- florham park NJ
I thought about using a tree till i borrowed the backhoe and for the plasma cutter best money ever spent
vinnies10
New member
- 173
- 1
- 0
- Location
- florham park NJ
its getting there
Attachments
vinnies10
New member
- 173
- 1
- 0
- Location
- florham park NJ
3 full days and got this far
Attachments
Last edited:
Billy Bobbed
Active member
- 1,346
- 13
- 38
- Location
- Terre Haute,Indiana
No matter how many bobbed pictures you see,it doesnt get old to me.Nothing like seeing a guy doing a bobbed job in the drive were the neighbors can see.My one neighbor helped will the others watched on their porches.Priceless
vinnies10
New member
- 173
- 1
- 0
- Location
- florham park NJ
People do look at me like im nuts but then my neibors love me and ask what's next
vinnies10
New member
- 173
- 1
- 0
- Location
- florham park NJ
Its almost done just small stuff to do. took me four long days
Attachments
Boss Doug
New member
- 266
- 1
- 0
- Location
- St. Petersburg Fl
Man that is looking good!! What’s next and what plasma cutter did you purchase?
- 34,012
- 1,808
- 113
- Location
- GA Mountains
I like the looks with the 1100 tires dualed and the shortened factory bed.
vinnies10
New member
- 173
- 1
- 0
- Location
- florham park NJ
It a hobart 250 its a little to small but it worked
vinnies10
New member
- 173
- 1
- 0
- Location
- florham park NJ
I dont know if i should leave them or go to bigger singles
deathrowdave
Active member
- 387
- 81
- 28
- Location
- falmouth, ky
Its great to keep the neighbors on there toes !!!
markmontana
New member
- 1,001
- 3
- 0
- Location
- Mesquite, NV/Layton, UT
I'd run with the 11.00's for a while. But eventually you will get the bigger singles- trust me on that.
Kenny714
Member
- 91
- -1
- 8
- Location
- Forked River,NJ
Looks good Vinny. Missed this thread but, I was up at Jadie's on Saturday picking up a new bumper for mine and he told me you were just about done with it. Good luck!!!!
A friend borrowed mine to pull someone out and decided it would be a good idea to try it from the front. Bad idea!!!!!!
A friend borrowed mine to pull someone out and decided it would be a good idea to try it from the front. Bad idea!!!!!!
vinnies10
New member
- 173
- 1
- 0
- Location
- florham park NJ
Is jadie on this siteLooks good Vinny. Missed this thread but, I was up at Jadie's on Saturday picking up a new bumper for mine and he told me you were just about done with it. Good luck!!!!
A friend borrowed mine to pull someone out and decided it would be a good idea to try it from the front. Bad idea!!!!!!
View attachment 217500
Last edited:
Kenny714
Member
- 91
- -1
- 8
- Location
- Forked River,NJ
I don't think so.