• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

I'm in need of some dimensions for a PU-751/M

AVFD8

New member
19
0
0
Location
alburg vermont
Hello,

I'm going to be retrieving 3 PU-751/M 5 kw gensets on m116a2 trailers as well as a few other surplus items for the village that I work for. I'll be loading them on a trailer. I 'm hoping someone with one of these could give me the following measurements:from the front of the generator to the front of the bed, and from the back of the generator to the back of the bed. I'm hoping to load some of the other items on the trailers.

Thanks in advance.
 

AVFD8

New member
19
0
0
Location
alburg vermont
I just got informed today that I'm going to have the 3 PU-751/M's and 2 MEP002's to load on my trailer. I think I can get all to fit. It has a 20 ft dek and a 6 ft tongue.
 

AVFD8

New member
19
0
0
Location
alburg vermont
I'll be leaving tonight to arrive at Aberdeen at 0730 to get the trailer. From Aberdeen I'm of to Letterkenny to load the 3 PU-751/M's. If time allows I'll go to Mechanicsburg to load 2 MEP002A's and a welder/generator. I'm hoping to load the MEP002A's crossways on the front of the PU-751's. I might have to unbolt the gensets and slide them back abit. I know I'll have to remove the toll boxes. I'll post pictures of the recovery.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks