At the rally yday i found me some led turn signal and the numbers on those wires isred 460 green483 and blue 491 my truck metal tags are Dr side is 22 23 and 24 and pas side p8 p9 and p10 any idea which numbers on the leds to my old AO numbers ?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
info on front turn signal wire numbers
- Thread starter chucky
- Start date
- 530
- 837
- 93
- Location
- Texas Hill Country
On my A1 led turn signals - driver: 22 blue, 23 red, 24 green; passenger: P8 green, P9 red, P10 blue—
- 2,018
- 5,186
- 113
- Location
- Portland, OR
You can't go by the colors. Sometimes the colors and numbers aren't the same between different light manufacturers. I've witnessed this first hand with Grote and Trucklite being inconsistent. The numbers were correct but on the wrong color tags.
P8 -> 483/484
P9 -> 460/461
P10 -> 491
P24 -> 483/484
P23 -> 460/461
P22 -> 491
P8 -> 483/484
P9 -> 460/461
P10 -> 491
P24 -> 483/484
P23 -> 460/461
P22 -> 491
thank you so much out here in the driveway hopeing for a nice easy anwser like this ! Many thanks ive been wanting leds for 5 yrs now on the front and they were darn near giving them away 20 bucks each with clear lenses Ok im out to plug em up i will get back with ya
- 530
- 837
- 93
- Location
- Texas Hill Country
Good to know.
Our Trucklite units are:
P8 -> 483/484 Green
P9 -> 460/461 Red
P10 -> 491 Blue
P24 -> 483/484 Green
P23 -> 460/461 Red
P22 -> 491 Blue
- 2,018
- 5,186
- 113
- Location
- Portland, OR
No. They only work in the Park position. They are off in every other mode.
OH i will try that in the morning i was sitting here thinking no wonder they were 20 bucks lol so i guess its all good and thanks again for the info made it much easier !
- 2,018
- 5,186
- 113
- Location
- Portland, OR
No problem - I have had to figure out that wiring on a number of occasions on my truck and others in the Motorpool so I have the wire numbers notated in my phone's digital notepad for quick reference.
Tell me the story about your winch/tool box/shackle extension. Haven't seen that before.....
Well like most everything else ive got i had to make it since since my modeling career money hasnt come in yet ! Theres more/better pics in my camper post but its just 1/2 inch plate i wideld up and made it so you could bolt the tray to the front or the back of the truck using the factory pin holes on the frame and some massive self locking bolts then made a 3/16th boxtop with lid to keep the winch out of the weather or a stage for last minute drunken strippers to dance on( see the wheels constantly turning ) I just wanted the tray to be stout enough to be able for a wrecker to pick the frontend up if it had to be towed (hope not ) and a way to slow down woodbe thieves from hauling off my winch is the gist of it !No problem - I have had to figure out that wiring on a number of occasions on my truck and others in the Motorpool so I have the wire numbers notated in my phone's digital notepad for quick reference.
Tell me the story about your winch/tool box/shackle extension. Haven't seen that before.....
- 212
- 228
- 43
- Location
- Woodside CA
I was looking for this info for the rear the other day when I found this thread, which will make changing out the front easier today. Didn't find the rear info, so I had to figure it out, so I thought I would post the rear numbers here so it's all in the same place for the next person looking. The below is from the new Trucklite LED's.
Passenger Rear:
P61 - 460/461/22
P62 - 24
P63 - 23
P64 - 21
Driver Rear:
P73 - 21
P74 - 460/461/22
P76 - 24
P77 - 23
Passenger Rear:
P61 - 460/461/22
P62 - 24
P63 - 23
P64 - 21
Driver Rear:
P73 - 21
P74 - 460/461/22
P76 - 24
P77 - 23