cjkeeliii
New member
- 165
- 3
- 0
- Location
- Thomasville, GA
Has anyone installed a Draw Tite hitch on their m1008? I'd like to install the heaviest one possible and still retain the tow hooks. Any thoughts?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Installing a Draw Tite Hitch on an m1008.
- Thread starter cjkeeliii
- Start date
CCATLETT1984
New member
- 3,507
- 5
- 0
- Location
- Saint Clair Shores, MI
please use the search feature, this has been covered many times.
JohnFire
Member
- 336
- 4
- 18
- Location
- Pottsville, PA
I know on our fire company's M1028 the only thing that was lost off of the tow hooks was one of the mounting holes on each one. A quick cut with a 3 inch cut off wheel and they still had the two main support bolts Which are fairly heavy duty. Grade 8 if I remember right and a good size. It was a snug fit for the hitch and to get it to slide into place we used a jack to push the hitch up, and some weight on the tail gate. Then it popped right in.
cjkeeliii
New member
- 165
- 3
- 0
- Location
- Thomasville, GA
Thanks for your help!
cjkeeliii
New member
- 165
- 3
- 0
- Location
- Thomasville, GA
Any suggestions on language for a search: I can't get any results. Thanks!
CCATLETT1984
New member
- 3,507
- 5
- 0
- Location
- Saint Clair Shores, MI
search "cucv AND hitch"
the uppercase "and" is a boolean search operator, meaning that the search will then only show you threads in which both terms are present.
the uppercase "and" is a boolean search operator, meaning that the search will then only show you threads in which both terms are present.